Livos KOIMOS High Solid Floor Nr. 208-064, colour Dark walnut

Item number: POL-208-064-L

Category: Fußboden

Gebindegröße:

starting from 19,20 €

including 19% VAT. , plus shipping

Shipping time: 10 - 15 workdays



Technical information

Application range

For interior use on floors, solid wood, e.g. parquet or floorboards. Only suitable to a limited extent for diningtables and kitchen countertops.

 

Technical qualities

For an especially intensive coloration with one application. The color light preserves the natural color of the wood, by e.g. pine, cherry, and beech. Low in solvents. A semi-matt surface after the 1st coat. Complies with German Industrial Norm (DIN) 53 160 for color fastness when exposed to perspiration and saliva.

 

Full declaration

According to color tone: Linseed oil, wood oil, castor oil - natural resin ester, micronized wax, linseed oil - stand oil - natural resin ester, mineral pigments, titan dioxide, alumina, isoaliphates, zinc carbonate, silicic acid, linseed oil -wood oil - stand oil, linseed oil - stand oil, pine oil, citron oil, castor oil - stand oil, orange oil, dehydrated amino sugar, ethanol, chalk, soy lecithin and drying agents free of lead (Ca, Co, Mn, Zr).

 

Application method

Stir thoroughly before use. Remove possible skin formed on surface. Always do a test application first! With a spatula for manual application, or with a roller coater for industrial application.

 

Coverage

Determine the exact amount needed by doing a test application.
1st coat:
Manual application: 18 - 32 g/m², i.e. 1 liter (1.06 quart) is sufficient for approximately 31-55 m² (333 - 592 ft²)
Industrial application: 12 - 32 g/m², i.e. 1 liter (1.06 quart) is sufficient for approximately 31-83 m² (333 - 893 ft²)

 

Cleaning

Clean equipment immediately after use with SVALOS Thinner No. 292, which can also be used to clean the roller coater.

 

Drying time

At 23 °C (73 °F) and 50% relative humidity: first coat 5 hours, 2nd coat 72 hours. Final degree of hardness is reached after 4 weeks. At higher temperatures, please consider shorter drying times and polish more quickly. At lower temperatures and higher humidity, please consider longer drying times as given above.

 

Specific gravity

Approximately 0.96 g/ml.

 

Safety advice
Always be sure to store and then dispose of cleaning cloths, polishing pads, sponges, etc. that are still wet or even slightly moist with KOIMOS High Solid Floor Oil No. 208 in an airtight metal container or in water, as there is a danger of spontaneous combustion caused by the plant oil content.


Manual application
Apply the first coat thinly with a spatula and polish in after max. 5 - 10 min. with a single disc rotary machine and a felt pad. For highly absorbent wood and if the deepening of the natural color of the wood is wanted, the 2nd coat can be applied at the earliest after 48 hours.

 

Industrial application

Mechanical application with solvent- and oil- resistant PU rollers at temperatures above 17 °C (63 °F). Revalue the surface by polishing after a drying time of at least 5 ? 24 hours.

 

Final coat

By making economical dosage (max. 5 g /m²). For this, distribute the oil (e.g. KUNOS Natural Oil Sealer No. 244) drop by drop on the first or the second coat, spread it and polish in immediately and evenly with a single disc rotary machine and a felt pad.

 

Care and maintenance

Clean with a damp, but not wet mop or cloth using TRENA pH-Neutral Cleaner No. 556 diluted in water. Maintenance should be carried out with KUNOS Floor Maintenance No. 1862 or KUNOS Natural Oil Sealer No. 244, when the surface looks matt.

Contact
Question on item


Please login first to add a tag.