Livos KUNOS Natural Oil Sealer Nr. 244-204, White

Item number: POL-244-204-W

Category: Fußboden


starting from 5,20 €

including 19% VAT. , plus shipping

Shipping time: 10 - 15 workdays

Technical information


Application range

For interior solid timbers such as furniture and floors. Only partially suitable for OSB, Multiplex and veneers. Not suitable for plywood, stained wood or cabinet interiors.


Technical qualities

Reinforces and deepens the natural color of the wood grain. After 1 coat a mat surface and after 2 - 3 coats it produces a silky-glossy film. Water-resistant according to German Industrial Norm DIN 68 861 part 1. Complies with DIN 53 160, fast to perspiration and saliva. DIN EN 71 part 3 certified, suitable for toys. KUNOS Natural Oil Sealer No. 244 was rated very good by the German magazine "Ökotest: Ratgeber Bauen, Wohnen, Renovieren" edition 5/2003.


Full declaration

Depending on color in different proportions: Linseed oil, linseed oil - stand oil - natural resin ester, linseed oil - wood oil - stand oil, highly transparent iron oxides, titanium dioxide, natural resin glycerol ester, linseed oil - stand oil, orange oil, isoaliphates, silicic acid, micronized wax, pine oil, rosemary oil, dehydrated amino sugar and drying agents free of lead (Ca, Co, Mn, Zr).



Application method

With a brush, spreading with an applicator or with a short haired roller. By spraying, dipping, with a wadded cloth, or with a polishing machine (roller coater), or an eccentric sander at temperatures above 16oC (61oF).



To be determined by doing a test application.

First coat: 45ml/m², i.e. 1 liter (1.06 quart.) is sufficient for approx. 22 m² (237 ft²)

Second coat: 11ml/m², i.e. 1 liter (1.06 quart.) is sufficient for approx. 90 m² (968 ft²)

Third coat: 4ml/m², i.e. 1 liter (1.06 quart.) is sufficient for approx. 250 m²/l (2 690 ft²)

Total: 60 ml/m², i.e. 1 liter (1.06 quart) is sufficient for approximately 16 m² (172 ft²)

For spraying, add max. 5-10 % SVALOS Dipping and Spray Thinner No. 293.

For dipping, use max. 10-20% SVALOS Dipping and Spray Thinner No. 293.



Clean equipment immediately after use with SVALOS Thinner No. 222 or LEVO Brush Cleaner No. 997.


Drying time

At 23oC (73oF) and 50% relative humidity: First coat 12 hours, subsequent coats 24 hours, final durability is reached after 4 weeks. At higher temperatures, please consider shorter drying times and polish more quickly. At lower temperatures and higher humidity, please consider longer drying times as given above.


Specific gravity

Approximately 0.89 g/ml.


Safety advice

Provide enough ventilation after application.

Always be sure to store and then dispose of cleaning cloths, polishing pads, sponges, etc. that are still wet or even slightly moist with KUNOS Natural Oil Sealer No. 244 in an airtight metal container or in water, as there is a danger of spontaneous combustion caused by the plant oil content.




Stir thoroughly before use. Remove possible skin formed on surface. Test application is recommended. Depending on surface requirement, absorbency and the type of wood, apply 1 to 3 thin coats, until a coating layer has developed. For an especially smooth and heavy-duty surface, sand in between after the first application. On furniture, use a pad (fleece or approx. the same) of at least 280 grain. On floors, use a non abrasive pad (beige pad or else felt).

Polish in the wet film with the first 2 coats after 10 ? 15 minutes with a polishing machine, eccentric sander or a lint-free cotton cloth. The 3rd coat must be polished in immediately after drop by drop application of approx. 1 teaspoon of KUNOS per m². On floors and heavy-duty surfaces apply at least 3 coats, spreading with an applicator or with a short haired roller, or with a machine.


Cleaning and care

Clean with TRENA pH-Neutral Cleaner No. 556 (add a maximum of 10 ml in 10 l of water). Wipe it with a moist, but not wet cloth. Every 4th to 5th cleaning should be done with GLANOS Natural Liquid Wax Cleaner No. 559 instead of TRENA. If the wooden surface looks matt, apply a thin layer of KUNOS Floor Maintenance No. 1862 and polish or rub it into the surface. Otherwise, the KUNOS Maintenance No. 1893 is an alternative.

Question on item

Please login first to add a tag.